Subject: Sun n fun pictures
From: Rotary Engine
Date: 4/11/2006, 9:48 PM
To: AAme




    Can anybody find the major design flaw in
    this double reduction belt PSRU?
    Interesting idea. Looks great :)

    Paul Lamar ...No rotor no motor.



A very interesting design.  It's very pretty.  I don't know what the
major design flaw is..

Seems like a heck of a lot of machining.

The belt tensions surely isn't adjustable.

Looks like it wouldn't be fun to change belts either.

If a belt breaks, there's interesting loading on the shafts.

It uses 6 belts??

No obvious provision for CS prop, though the red/purple anodized section
could take pressurized oil.

The prop shaft is essentially cantelievered from the red/purple section
- presumably concentric with the input shaft.

It looks like it uses pressurized lube.  That's a heck of a lot of seals
to fail.

It only has 5 prop bolts..  :)


Matt-


I don't know what Paul sees. On another list it has been stated that it
uses an oil bath, not pressurized. It has been claimed belt tension is
not needed for belts this short. It uses a electric prop. 3 belts are
input, 3 belts are output. The combined ratio gives the final ratio.
Input and output shafts are indeed concentric. Lots of overhung loads.

I too am curious as to what Paul sees.

Ken

OK the top cantilevered shaft is in cyclical reverse bending
due to belt tension. Not to be confused with pre tension
as there is no pre tension.  Ideal conditions for fatigue as the
shafts are really just thin wall tubing.

The cantilevered prop shaft is more or less balanced
due to belt tension.

Belt tension arises due to the fact that at 2700 RPM
the prop torque is 200 HP x 5250 /2700 RPM or about 400
foot pounds or 4800 inch pounds for one belt. With a four
inch pulley belt tension would be 1200 pounds.

It could be fixed with a more complicated center housing.

The other flaw in the thinking is the so called redundant
or back up nature of multiple belts. Supposedly if one belt breaks
you have two others. Trouble is the load goes up on those
belts that are left so they will soon fail as well.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.