Subject: Sun n fun pictures
From: Rotary Engine
Date: 4/12/2006, 6:30 AM
To: AAme




    Can anybody find the major design flaw in
    this double reduction belt PSRU?
    Interesting idea. Looks great :)

    Paul Lamar ...No rotor no motor.



A very interesting design.  It's very pretty.  I don't know what the
major design flaw is..

Seems like a heck of a lot of machining.

The belt tensions surely isn't adjustable.

Looks like it wouldn't be fun to change belts either.

If a belt breaks, there's interesting loading on the shafts.

It uses 6 belts??

No obvious provision for CS prop, though the red/purple anodized  section
could take pressurized oil.

The prop shaft is essentially cantelievered from the red/purple  section
- presumably concentric with the input shaft.

It looks like it uses pressurized lube.  That's a heck of a lot of  seals
to fail.

It only has 5 prop bolts..  :)


Matt-

Maybe the belts are adjustable.  I think the pulleys expand as you
tighten the bolts around rim.   Jerry


You don't need to pre tension a cog belt. The pulleys don't
expand.

It works as long as it it is not loose enough to jump teeth.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.