True in theory Bill but the top shaft is supposed to
provide that support. For every action there is a reaction.
It is the long cantilevered top shaft on the Eggenfellner
that has the cyclical fatigue problem even if no belts
break. Not only must it deal with its own developed belt tension
it must deal with some of the lower belt's tensions.
Good point on the bearing speed.
Fred, The major problem
will be the one rotor torque pulse effect on the cog belt.
You should think about a torque pulse isolator.
Paul Lamar ...No rotor no motor.
Paul, Very good point on the torque pulse effect. I believe the major
car manufacturers use the ratchet spring tensioner to help that problem.
This results in a VERY tight belt though. Don't forget to add that
tension load (static) to bearing calcs.
Bill
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.