I am planning to use engine oil (Mobile 1 or Paul's Idemitus), after the
   filter, if that's OK with the bearings. The thought is to keep the
   cog belt
   unit as close to the block temperature as possible to minimize any
   differential expansion problems. Needs a high flow, low pressure, with
   return to the pan. May even have to wrap the unit to keep it cozy.

   Fred O.

Fred,
Sounds like you're on the right track.
Bill Jepson



The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.