> Roger,
> This schematic answers a lot of my questions.
> One remains.
>
> How does Megasquirt know how many cylinders
> the engine has? I assume it thinks it gets a coil
> firing signal twice per rev for a four cylinder.
> Same as
> 2 rotor rotary. If it assumed the same thing for a
> six
> it would underestimate the RPM.
>
> Paul Lamar ...No rotor no motor.
You got it right. Four cylinder, four stroke are
the
settings for 2-rotor.
Roger.
OK. Where is that set? In the software? Or is there
a jumper somewhere?
Paul Lamar ...No rotor no motor.
Paul,
All settings are made via separate tuning software,
and burned to flash. To change, you must connect to a
PC via serial port. Most use MegaTune, which runs
under Win95 and newer. Lucky for you there is a Linux
version of the tuning software, called MegaTunix!
http://megatunix.sourceforge.net/screenshots/
Roger.
MegaTunix! ROFL That is a great name.
I won't need it. I have a Windozes notebook computer
that will be dedicated to this job. the assembler does not
run under Linux anyway nor does the vast majority of other
Megasquirt aux programs.
--
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.