Subject: Motor Mount design in gneral.
From: Rotary Engine
Date: 4/24/2006, 6:56 PM
To: AAme


Here is a force diagram and stress calculations
on two motor mount designs.


Hi Paul,
I have not been a structural engineer for 40 years, but on checking
your math in the first diagram, I get 2400 lbs tension (21600/9) and
2563 lbs compression (2400 X 25.63 / 24). I think the error is the
dimension between top and bottom pin joint.
Also,  your #2 force diagram has a typo, the vertical distance should
be 15, not 9.  I agree with your #2 math.
BR, Dave McC


Taking moments around the the top tube where it intersects
the firewall I get 24 inches times 900 pounds or 21,600
inch pounds. Since the points are 4 inches top to bottom
apart each force is 21,600 / 4 or 5400 pounds.

Hi Paul,
sorry, in case #1, I thought the points were 9 inches apart.
AOK, Dave McC



The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.