Subject: Another interesting ACRE motor mount.
From: Rotary Engine
Date: 4/25/2006, 1:14 PM
To: AAme

This one was implemented by John Slade
and he has been flying it for several years.
He reports excellent vibration isolation.
Perry Mick also built a unit but did not install it
in his Long EZ yet.

We call it the "Bushing-in-Firewall" mount.
It is best suited to composite aircraft as there
are no bolted connections to the composites which
are always a problem. The rubber bushings distribute
the concentrated load into the composite firewall much better
than a hard bolted connection.

The down side is there are local bending loads
in the tubing near the rubber bushings. There fore
these areas must be beefed up with additional tubes
making the mount rather complicated and FEA is required
to be sure they are durable long term.


Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.