Paul,
I know of two programs that are free and appear to be
fairly simple to use. One is called "Framework" and can
be found here: http://home.wanadoo.nl/wolsink/
snips....
Aubrey
I down loaded this one but the input is metric.
Looks pretty good. The user interface is a bit strange
but typical of foreign programs. It is amazing how
the programmers native language (Dutch) affects the look and
feel of a program's user interface.
I got hung up by this.
I need a few numbers in metric.
Density of steel? Kg/Meter^3
Modulus of elasticity of steel? Kn/Meter^2
Poisson ratio but as I recall that is dimensionless
and as I recall it is 3 but I could very well be wrong.
Here is a dxf of my test space frame.
The program loads and reads this file OK.
Paul Lamar ...No rotor no motor.
Paul,
The metric density of steel is 7830 kg/m^3
and the elastic modulus is 207 Kn/meter^2 .
Poisson's ratio is about 0.3 for most metals.
Aubrey
Bingo! Those are the numbers I was looking for.
Thanks Aubrey.
I'll keep fooling with this Dutch program until I learn enough
about it to use it. It seems much more comprehensive than
the Java applet.
---------------------------------------------
I fooled with it some more and I now have it pretty well
figured out. The light lit when I looked at:
"Help" > "How it works."
It is way over kill for a simple properly designed
space frame such as the ACRE motor mounts and probably
not worth the effort.
Not so simple for a motor mount with bending loads in the
tubes. From the looks of it there are several hours work
inputing such things as the torsional stiffness of each
member. That is only one of half a dozen properties
required for each member. In a complicated motor mount
with eight or ten tubes of varying sizes it is a very
tedious process inputing all the data in metric numbers.
At least for me. There may be an inch mode which I have
not tried yet.
I am very impressed as it is so comprehensive for a free program.
It could be made easier by selecting properties from
a tree of menus.
Beam type: Tube, I-beam, box etc., etc..
OD:
Wall:
Material: Steel, aluminum, wood, etc., etc..
Max stress:
Fixation: welded, bolted, etc., etc., etc..
etc.:
etc.:
What do you think Aubrey?
Paul Lamar ...No rotor no motor.
Paul,
Well, I thought the Dutch program was pretty cool too, until it crashed
the first time. I was not using its DXF import feature, but, entering
the truss joint coordinates from the Acro-Sport mount. The drawing the
program showed was a little strange and it returned a message that some
tubes intersected when they shouldn't have. Eventually it locked up.
Undaunted, I sketched a simplified version of the mount with all the
joints at integer locations and less than 10. This time the program
showed the drawing correctly. After entering the tube "properties"
every thing seemed OK. But, then when the "properties" window was
closed and re-opened a divide-by-zero error popped on the screen
momentarily and the program closed itself. I've now crashed it three
times. I'll experiment with it some more tonight. Of course the first
item that I'll try is the "save as" command!
Entering the truss member properties data is a pain. Does anyone know
of a 4130 tubing data table on the Internet that could be used in a
copy and paste fashion?
Aubrey
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.