Subject: Alternator Terminals -- I mean "Starter" terminals
From: Rotary Engine
Date: 4/30/2006, 12:01 PM
To: AAme



     Hello All,

     I'm in the process of wiring up my engine, and I am trying to
identify
     the terminals on my alternator.  Does anyone know what each of the
three
     terminals are for?

     Note: Terminal "A" has lead going from the solenoid to the starter
     motor.  This starter was adapted to mate with a ROSS PSRU, so I'm
not
     even sure that this is a Mazda starter.  I've included a couple of
     pictures to help clarify what I am asking.


     Thanks for your help,

     Burck Hantel



Hmm... that looks like a starter & solenoid period... no alternator
there at all.

Connect (B) to your starter button -- it should get +12 volts when you
wish to energize the solenoid.

Connect (C) to your battery (or starter contactor if your wiring based
on the AeroElectric Connection Z drawings).

(A) stays as it is.

Mark Supinski

Now with my little terminology mix up behind us -- :o)  Would I be able
to jump terminal "B" to terminal "C" and have "C" tied to the high amp
lead going to a starter contactor.  Once the contactor is energized, it
would energize the high amp lead which will then energize both terminal
B and C (at the same time) -- I know this kind of defeats the purpose
have having the solenoid switch that is built into the starter, but it
keeps power out of the high amp lead until it is needed for starting.

Thanks.

Burck

------------------------------------

I can't think of anything wrong with the idea as far
as it working is concerned.

Why do you want to keep power out of the high amp
lead going to the starter from the positive stud on
the battery? Seems to me you have more
connections to possibly fail not to mention the extra
weight of the additional contactor.

It does indeed look like a 2nd gen RX7 starter.

Paul Lamar ...No rotor no motor.


I had an automotive starter wired like that on my Lyc. RV4 and it worked
fine, the trouble was the starter would not last, the main contacts kept
wearing out, only lasted about 100 or 200 starts before having to
replace it.

Chuck D.


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.