------------------------------------
I can't think of anything wrong with the idea as far
as it working is concerned.
Why do you want to keep power out of the high amp
lead going to the starter from the positive stud on
the battery? Seems to me you have more
connections to possibly fail not to mention the extra
weight of the additional contactor.
It does indeed look like a 2nd gen RX7 starter.
Paul Lamar ...No rotor no motor.
---------------------------------------------------
I had an automotive starter wired like that on my Lyc. RV4 and it worked
fine, the trouble was the starter would not last, the main contacts kept
wearing out, only lasted about 100 or 200 starts before having to
replace it.
Chuck D.
--------------------------------------
Hi Paul,
The plane that I have is an Osprey 2. With the engine on a pylon, I cannot
have the battery inside the engine compartment due to the limited cowling
space. So by having the battery inside the cockpit, I wanted to limit the
amount of juice going into the pylon -- to avoid any accidental shorts etc.
But, I'm still bouncing the idea around of having a continuously hot lead
going to the pylon -- because why would I be having any shorts if I designed
it correctly.
Cheers,
Burck
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.