Subject: Oil Pan & sensors and Thorp MM tubes
From: Rotary Engine
Date: 5/1/2006, 10:12 PM
To: AAme



The oil level sensor is just a mechanical float activated switch inside that


Hi Paul,

I started to take my 13b 1986 apart,
I noticed the oil pan has been hit and is embossed at least at two places, I
will replace it.

What about the sensors inside the oil pan though?
What are they? oil level or temp? and will they be used on the RV7a?

Thanks

JP

They are oil level. I have never had one apart so I have no idea how they
work.

--
Paul Lamar ...No rotor no motor.



The oil level sensor is just a mechanical float activated switch inside that
ventilated tube in the oil pan.


I forgot to mention that the vertical tubes on my Thorp engine mount were
just temporary tacked on to hold everything in position for welding and the
mount is .049x3/4 4130 tubing. The "X" will be .049x1/2 tubing. Karibian


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.