Subject: Oil Pan & sensors
From: Rotary Engine
Date: 5/1/2006, 6:59 PM
To: AAme



Hi Paul,

I started to take my 13b 1986 apart,
I noticed the oil pan has been hit and is enbossed
at least at two places, I will replace it.

What about the sensors inside the oil pan though?
What are they? oil level or temp? and will they be used
on the RV7a?

Thanks

JP


They are oil level. I have never had one apart so I have no idea
how they work.

--
Paul Lamar ...No rotor no motor.

  They are a simple float and contacts, pull the three bolts and you
have the whole thing in your hand and its all open and exposed.
  Ken

Well I'll be! You are right again Ken :)

Just a simple float and contact system.
The float is some sort of conductive plastic
rigid foam. The brown parts are insulation.
When the float goes up it opens the circuit.
When the oil level drops and the float goes down
it grounds the wire.

Paul Lamar

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.