Hi Paul,

I am hoping you will help me out with a motor mount for my Bushcaddy.
I'm planning on using the Renisis Engine. Here is the information I have
from the factory. I've also included 2 pdf's on thrust line, and
firewall mounting.

I'm planning on using Tracy's Redrive.

Thrust line 175mm down from the center line of the two main upper engine
mount bolts.
Prop flange w/IO-360 approx 45in. from firewall.



Thanks for your help, and keeping a great discussion group going.

Rick in Alaska

Now I know why they call it the Caddy :) This an enormous
airplane. There is room under the cowl for two RX8 engines
side by side :)

I used the rad under the fuse trick. That will get you in
the air much quicker as no new cowl or starter mods
will be required. I would go up on the lower tubes
sizes to one inch in diameter as they are rather long.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.