>
> Hi Paul,
>
> I am hoping you will help me out with a motor mount for my Bushcaddy.
> I'm planning on using the Renisis Engine. Here is the information I
> have
> from the factory. I've also included 2 pdf's on thrust line, and
> firewall mounting.
>
> I'm planning on using Tracy's Redrive.
>
> Thrust line 175mm down from the center line of the two main upper
> engine
> mount bolts.
> Prop flange w/IO-360 approx 45in. from firewall.
>
>
>
> Thanks for your help, and keeping a great discussion group going.
>
> Rick in Alaska
>
> The firewall dwg is self explanatory but I don't understand
> the significance of the second jpg.
>
> -- > Paul Lamar ...No rotor no motor.

I think the second Jpg depicts the structure behind the firewall.
Jerry

Yes I have come to the same conclusion.

BTW Rick I think you need a turbo charger or P-port. I was climbing
out of Valdez going to Anchorage and 13,000 feet was not
enough to get over the clouds on top of the mountains.

Plenty of room under the cowl for turbo charger and intercooler.

Looks like a fun airplane.

Paul Lamar ...No rotor no motor.

Hi Paul,

It is the structure behind the firewall. As for turbo or P-port, It's going
to be a flying truck on floats. It will probably never see 10,000'. Low and
slow, besides you can't see the Moose from 5,000'. LOL Thanks for your help.


Rick in Alaska



The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.