Ed Klepeis,

Here is what you or the customer must
do to get a reasonable simple RX8 engine six port manifold
with only four tubes. The outer tubes should be
two inch in dia. You will have to make a transition
from oval to round from .065 sheet aluminum.

Easier and cheaper to do a p-port. This stuff must be done
in road racing because p-ports are outlawed.

Too powerful!

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.