In an attempt to keep up with our rapidly advancing
rotary engine technology the air cooled aircraft engine guys
are copying us again. First it was the electronic ignition.
Then it was the electronic fuel injection. Now it is the
slide throttle. The next thing you know they will
be attempting to copy us on the turbo compound but they
will fail miserably. Their stinking exhaust valves will
come apart and take out the turbine on the way out
the exhaust pipe.
It is a rotating slide throttle with a Teflon slide.
I did not draw it to exact scale so it does not
look exactly like this but I hope you get the idea.
It is an exploded view.
I am not allowed to tell you who is building this but I have
seen it with my own eyes. It is for a four cylinder
air cooled aircraft engine. Obviously it is for a
Continental engine as a Lycoming has the intake
tubes buried in the crankcase. It is mounted about where
the carburetor is mounted under the engine and it is
for use with electronic fuel injection.
Here are a couple of illustrations of our Teflon
slide throttle for comparison.
For more info on rotary engine Teflon slide throttles:
http://www.rotaryeng.net/intake.html
Paul Lamar ...No rotor no motor.
Dear Paul
Your Slide throttle looks great is it in use and how does
it compare say with a throttle body. Is it lighter,smaller,etc.
and are you going to produce these units and if so how much.
Regards
Ed Klepeis
More power and lower fuel burn are the goals of the p-port
slide throttle engine. It does this by better breathing
with less internal HP consumed by sucking air past several
obstructions in the intake system.
Mark Supinski is going to run his p-port slide throttle
engine anyday now and Tom Weber has taken over production.
Paul Lamar ...No rotor no motor.
Dear Paul
How can I get in touch with Tom Weber.thanks
Regards
Ed Klepeis--
I think he is on vacation right at the moment.
Check back in a week or so.
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.