Subject: High pressure fuel pump priming.
From: Rotary Engine
Date: 5/9/2006, 11:45 PM
To: AAme

There has been a lot of discussion on other engine
groups about high pressure EFI fuel pump priming.
Some say it is because of trapped air in the fuel
rail or plumbing. I don't buy it. The injectors
open periodically  releasing any trapped air
when an attempt is made to start the engine.

The fact of the matter is high pressure fuel
pumps don't suck well in my experience. They need
to be as low as possible relative to the fuel tank
and have no loops in the feed line. They work best if
continually submerged in the fuel in the tank.
If they don't prime right away they can be damaged
and over heated.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.