Subject: manometer on 80 mph plane
From: Rotary Engine
Date: 5/11/2006, 9:24 PM
To: AAme


Paul are you saying that even on a rad that is only 5 x 7" you
need 4 test points?

I think the problem with this installation is that the back of the
rad sees the inside of the cowl which is being pressurized by the
other nostril inlet.
Peter

Well it would not hurt. Make sure you use a one piece sealed duct.
Don't try to use part of the cowl as the duct.

Yes an open nostril on the other side is a no no. Can you
block it off? Better yet use it to feed cold air with
a sealed duct to the carb or air cleaner.

Paul Lamar

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.