Hi Folks, I still have some 2 inchX .049 Inconel 625 90 degree mandril bends.They have a flare on
one side to sleeve onto a straight piece of pipe or you can cut it off to weld straight to tubing.
If anyone is interested you can contact me offlist to get these for your custom exhaust. These bends
weld just like SS and can be welded to several different types of SS.
If you are interested, the bends are $90 each.
I have enough for about 9 or 10 rotary enthusiasts.
--
Doug Mueller
RX-6 13BT
N900DM
Boulder City(61B),Nevada
Rotaryrx6@cox.net
-
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.