Subject: New Kind of Engine - FYI
From: Rotary Engine
Date: 5/15/2006, 6:56 PM
To: AAme



    > Hi Folks,
    >
    > This directly rotary engine related, but it was something that I
   found on
   the
    > net that may perk the interests of some of you.   Personally I
   don't know
   if I
    > should laugh or be intrigued.  Take a look at this site:
    > http://www.angellabsllc.com/  and if you want me to tie in the
   rotary,
   look at
    > this link: http://www.angellabsllc.com/Engine_cmparison.html
   <http://www.angellabsllc.com/Engine_cmparison.html>
    >
    > Cheers,
    > Burck

     Burck,
   Great concept!
   I looked at this concept a couple of years back, it appears they
   have solved
   the timing issues I couldn't work out, but I wonder if they have
   solved all
   the sealing, oiling and cooling issues. This is where many designs
   fall down
   badly.

   I can't see where they have run an engine for any period, let alone a
   prolonged period.

   Personally I hope it's a great success, but time will tell!
   George (down under)

It looks like the seal around the paddle would have
to cross the seals for the disks at a right angle.
That would seem like a tough issue to me.
I would guess the spinning disk and paddle idea has been
around for awhile. I wonder what exactly has been patented.
-Jeff

Exactly. This is the "rotary" engine of the month.
I don't want to give publicly to something that has a snow balls
chance.... of succeeding. Billions have been spent developing
the Wankel rotary and it still has a ways to go before
becoming perfect.

So here again is Kenichi Yamamoto's criteria for a successful
rotary engine.

http://www.rotaryeng.net/What-is-a-rotary-engine4.txt


By Kenichi Yamamoto from his book "Rotary Engine" 1981

1.3     REQUIREMENTS FOR A PRACTICAL ROTARY ENGINE
       Although various types of rotary engines have been
developed to date, there are few that do not qualify as internal
combustion engines or do not qualify as a practical engine even
if they satisfy the qualifications of an internal combustion
engine.
       The requirements for a rotary engine to be qualified
as a practical internal combustion engine can be summed up in
the following five items. The practicality of various ideas on
rotary engines can be judged by evaluating them by these
criteria:

(1) Every moving part, including the timing mechanism, should
make a rotating motion. A mechanism having a reciprocating
inertia will increase mechanical noise and vibration, and will
work against high speed and high revolution.  Accordingly,
structures that require intake and exhaust valves and
mechanisms using the rotors oscillatory motion are not
desirable.

(2)     Gas seals or the working chamber should be three
dimensionally reliable.  The gas seal mechanism of a rotary
engine should be constituted by connecting the individual seals
three dimensionally. Among the many ideas we come across are
those that don't show such three dimensional thoughts.

(3)     Appropriate gas exchange of intake and exhaust should
take place. Together with having a mechanism that can correctly
open and close the ports, sufficient time for intake and exhaust
should be provided especially for high speed and high
revolution.  Among the ideas on rotary engines, there are some
that ignore this point.

(4)     Every component part should have the strength to endure
high speed and high pressure.  As the component parts are
exposed to high pressure, high sliding velocity and high heat
load, every part should have sufficient allowance in size and in
shape.

(5)     Sufficient cooling and lubrication should be provided.
In order to qualify as an internal combustion engine, although
this is related to above (4), durability against high heat load,
high sliding velocity, etc. are required. Therefore, the
structure should be simple, and the ideas on rotor cooling,
lubrication of seal parts, and oil seal structure should be
those that are given adequate thought.
       Also, it is desirable for a practical rotary engine to
have a simple and compact structure. When we evaluate the
various type's of rotary engines devised to date in view of the
above mentioned requirements, the NSU Wankel type rotary engine
is the engine that best satisfies the above mentioned
requirements.

By Kenichi Yamamoto from his book "Rotary Engine" 1981

1.3     REQUIREMENTS FOR A PRACTICAL ROTARY ENGINE
       Although various types of rotary engines have been
developed to date, there are few that do not qualify as internal
combustion engines or do not qualify as a practical engine even
if they satisfy the qualifications of an internal combustion
engine.
       The requirements for a rotary engine to be qualified
as a practical internal combustion engine can be summed up in
the following five items. The practicality of various ideas on
rotary engines can be judged by evaluating them by these
criteria:

(1) Every moving part, including the timing mechanism, should
make a rotating motion. A mechanism having a reciprocating
inertia will increase mechanical noise and vibration, and will
work against high speed and high revolution.  Accordingly,
structures that require intake and exhaust valves and
mechanisms using the rotors oscillatory motion are not
desirable.

(2)     Gas seals or the working chamber should be three
dimensionally reliable.  The gas seal mechanism of a rotary
engine should be constituted by connecting the individual seals
three dimensionally. Among the many ideas we come across are
those that don't show such three dimensional thoughts.

(3)     Appropriate gas exchange of intake and exhaust should
take place. Together with having a mechanism that can correctly
open and close the ports, sufficient time for intake and exhaust
should be provided especially for high speed and high
revolution.  Among the ideas on rotary engines, there are some
that ignore this point.

(4)     Every component part should have the strength to endure
high speed and high pressure.  As the component parts are
exposed to high pressure, high sliding velocity and high heat
load, every part should have sufficient allowance in size and in
shape.

(5)     Sufficient cooling and lubrication should be provided.
In order to qualify as an internal combustion engine, although
this is related to above (4), durability against high heat load,
high sliding velocity, etc. are required. Therefore, the
structure should be simple, and the ideas on rotor cooling,
lubrication of seal parts, and oil seal structure should be
those that are given adequate thought.
       Also, it is desirable for a practical rotary engine to
have a simple and compact structure. When we evaluate the
various type's of rotary engines devised to date in view of the
above mentioned requirements, the NSU Wankel type rotary engine
is the engine that best satisfies the above mentioned
requirements.


Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.