Yes but I wonder if Van will also receive the same
economic benefit he is now getting from Lycoming.
The economy of scale is not with Mistral.
At the current time the rational for installing the rotary
is primarily economic. Until the turbo compound is
perfected and proven this will be the primary reason
people choose to install the rotary.
Power Sport had everything going for them yet they failed
in the market place. We still don't, after seven years,
have critical mass of acceptance for the rotary as
a superior aircraft engine. Part of that is the
5% worse fuel consumption, part is ignorance of why
the kinematics of the rotary are superior, part
the mystery of how the rotary actually works and part
the increased complexity of liquid cooling.
These drawbacks must be mitigated by a clearly superior
solution. This is why I am spending so much of my own money
building and dyno testing the turbo compound rotary
that potentially has the low fuel burn of a diesel
and a vastly superior power to weight ratio advantage
and durability advantage over an air cooled aircraft
engine.
Paul Lamar ...No rotor no motor.
On that note, when someone casts aluminum end plates, it would be a great
time to re-plumb the water jacket into 2 separate systems with each system
adjacent to the other... this would give us a truely fail safe liquid
cooling. Of course a second water pump would be needed and 2 smaller
radiators.
-dave
--
Best Regards /Mit freundlichen Gruessen,
dave ( at ) arb.net
http://arb.net
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.