Subject: Ethanol fuel in rotary
From: Rotary Engine
Date: 5/19/2006, 11:09 PM
To: AAme



   What is the consensus of burning E85 type fuel in a rotary engine?
   Rob Lundahl

   It will work fine.
   --
   Paul Lamar ...No rotor no motor.

   Will not Ethanol fuel still have the same ice formations problems at
   altitude as a conventional piston engine??

   Scott Carroll

   I have no idea what you are referring to. Up in Canada we used to
   put ethanol in our gas tanks in the winter to melt the ice in the
   fuel.

   Are you referring to a carburetor or fuel injection?

   I can see how ice might form on the outside of the intake
   runners due to evaporation of the ethanol. That could be
   mitigated by "carb" heat. God knows we have plenty of heat :)

   Paul Lamar ...No rotor no motor.

Water from the atmosphere disolves into alcohol in the fuel, raising its
freezing point.  The fuel lines may get slush in them or outright freeze
if the alcohol in the fuel has high enough water, and the temp is low
enough.

Long flights at high altitude might cool the fuel quite a bit.
Especially if running a non-recirculating fuel pump/pressure regulator
(which would tend to heat the fuel).

Surely this is a problem that has been addressed by some industrial
process.  I have heard that one means of addressing this is to store the
tank in a nitrogen purged environment.  Not a practical solution for an
airplane.

I wonder if a field test (or in-tank instrumentation) could be developed
which would indicate insafe levels of water in the fuel.  Or freezing
point of the fuel.


Regards,

Matt-



The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.