Subject: air exit "louver"
From: Rotary Engine
Date: 5/27/2006, 2:51 PM
To: AAme


>
> Hello Paul.
> Got my manometer made and will start testing of my rotax installation
> this weekend. What shape and size would you make the louver/baffle to
> help the exit air behind/above the 5x7" oil cooler at the top of the
> cowl? The cooler will be parallel to the cowl top and sealed around with
> foam.
> Thanks
> Peter
>
> Peter, only this picture came across. Is the air outlet in front
> of the windshield. I ask as that is a high pressure area
> in the center.
>
> Paul Lamar ...No rotor no motor.


Hello Paul.
Here is picture again:

OK so you suggest the flap should be the length of the rad (5"). What
slope would you start with?   Same slope on 3? You are probably going to
suggest they should be controlable. Didn't want to get that
sophisticated yet.

Main cowl exit 2 area some % larger than nostril area? Or probably 2+3
together?
Do you agree inlet to cooler should be 40% of rad area?
Peter

-------------------------
Start with 45 degrees.
40% sounds high but your airplane may have a slow max angle
climb speed.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.