Hello Paul-
I found the oil port you were suggesting for feeding the RD1C on the top
of the #1 end housing (aka front housing in the car). Initially I
couldn't tell if it was an oil port or a coolant port. I hand propped
per your suggestion to get oil pumped through the engine & cooler, and
when oil came welling up out of the mystery port (a-la Jed Clampet) I
got my answer.
I'll be adding a return port to the oil pan (btw -- you should add one
to the plans, since everyone will need it). I am assuming it is wiser
to add it to plugs side of the engine instead of the (hot) exhaust
side. Do you think the supply & return lines should be rigid tubing, or
flexible lines?
Mark Supinski
The turbo engine front (car) cover has a port for oil return
from the turbo you can use. Just below the apex oil metering pump.
I would use Teflon lined double SS braided AN hose. This is your
life you are fooling with :) Some use rigid aluminum line but they
are asking for it.
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.