Subject: Two rotary engines one prop
From: Rotary Engine
Date: 5/29/2006, 11:03 PM
To: AAme


    Dear Paul,

    Thank you for editing and distributing such an informative
    newsletter. I would like to ask whether you (or other subscribers)
    know of a reduction box which combines the output of two rotaries
    into one prop shaft, while enabling individual operation / sut-down
    of each of the two engines?

    Thank you very much, again.
    Ronen.

    How about the Lear Fan 2100. Twin Turboshaft
    engines driving a single prop. Take a look at this,


http://www.flyingmag.com/article.asp?section_id=12&article_id=653&print_page=y

    Erik

The Lear 2100 represents a solution that no one could afford.  It was a
technical success, but the economics of its materials and assembly
technology just weren't competitive.  The twin-pack engine approach is very
attractive on paper, but very difficult to execute in metal.  I don't recall
a single production commercial aircraft that has successfully used the
concept.  The maintenance and vibration issues did some of them in,
materials problems dogged others.  A multi-rotor Wankel might well be
superior in many areas, but the heat rejection versus packaging issues are
challenging.  Such an aircraft would need a variable pitch prop to get
maximum performance in a one-engine shut-down condition.  That means each
engine with an oversized pump or alternator.

George Wright

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.