Subject: Two rotary engines one prop
From: Rotary Engine
Date: 5/30/2006, 8:12 AM
To: AAme




    Dear Paul,

    Thank you for editing and distributing such an informative
    newsletter. I would like to ask whether you (or other subscribers)
    know of a reduction box which combines the output of two rotaries
    into one prop shaft, while enabling individual operation / sut-down
    of each of the two engines?

    Thank you very much, again.
    Ronen.

    How about the Lear Fan 2100. Twin Turboshaft
    engines driving a single prop. Take a look at this,


http://www.flyingmag.com/article.asp?section_id=12&article_id=653&prin
t_page=y

    Erik

The Lear 2100 represents a solution that no one could afford.  It was a
technical success, but the economics of its materials and assembly
technology just weren't competitive.  The twin-pack engine approach is very
attractive on paper, but very difficult to execute in metal.  I don't recall
a single production commercial aircraft that has successfully used the
concept.  The maintenance and vibration issues did some of them in,
materials problems dogged others.  A multi-rotor Wankel might well be
superior in many areas, but the heat rejection versus packaging issues are
challenging.  Such an aircraft would need a variable pitch prop to get
maximum performance in a one-engine shut-down condition.  That means each
engine with an oversize pump or alternator.

George Wright


There are thousands of twinpack successes out there.
They are helicopters.

(Ben) Bosma

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.