Subject: Two rotary engines one prop
From: Rotary Engine
Date: 5/30/2006, 11:02 PM
To: AAme


    >
    > Dear Paul,
    >
    > Thank you for editing and distributing such an informative
    > newsletter. I would like to ask whether you (or other
   subscribers)
    > know of a reduction box which combines the output of two
   rotaries
    > into one prop shaft, while enabling individual operation /
   sut-down
    > of each of the two engines?
    >
    > Thank you very much, again.
    > Ronen.
    >
    > How about the Lear Fan 2100. Twin Turboshaft
    > engines driving a single prop. Take a look at this,
    >
    >
    >
   http://www.flyingmag.com/article.asp?section_id=12&article_id=653&print_page=y

    >
    > Erik

   The Lear 2100 represents a solution that no one could afford. It was a
   technical success, but the economics of its materials and assembly
   technology just weren't competitive. The twin-pack engine approach
   is very
   attractive on paper, but very difficult to execute in metal. I
   don't recall
   a single production commercial aircraft that has successfully used the
   concept. The maintenance and vibration issues did some of them in,
   materials problems dogged others. A multi-rotor Wankel might well be
   superior in many areas, but the heat rejection versus packaging
   issues are
   challenging. Such an aircraft would need a variable pitch prop to get
   maximum performance in a one-engine shut-down condition. That means
   each
   engine with an oversized pump or alternator.

   George Wright


   All multi-turbine helicopters are essentially what we are describing
   here.. Multiple power sources driving a single consumer (rotor
   system). And yes, they are expensive..

   How about Soloy Dual-pac?

   http://www.soloy.com/dualpac.html

   The failmodes which could bring down both powerplants at the same time
   seem to suggest that you are probably actually reducing reliability
   compared to a single engine.

   Airframes with multiple engines really exist for two reasons. The first
   is that it's sometimes difficult to get a readily available engine in
   the horsepower value that's required for the size of the load. For
   instance, today, if you want a piston engine which makes more than about
   400hp, your choices are pretty limited. So, hang two of whatever you've
   got on the airframe.

   That brings us to the second reason to have multiple engines. Once you
   have two engines mounted, you go around telling everybody about this
   neat invention - a backup engine. What usually isn't discussed in the
   marketing verbiage is how much more likely you are to sustain a failure
   (statistically), and how much harder the thing is to fly when one of the
   engines craps out..

   So, instead of picking two crumby, air cooled rotary engines and trying
   to bolt them together, why not just pick one properly sized rotary and
   be done with it?? If that's not enough power, pick a three of four
   rotor version... :)


   Happy Monday.. er Tuesday.

   Matt-

What I like about Learfan is the tail-mounted prop -- a la Dornier 335
from WW2.

What Lear should have done was mount another engine and prop on the
nose. This would give a very nice axial-thrust twin with all the
advantages of his idea, but without the complexities of the gearbox,
which ultimately was the big stumbling block.

A twin of this design (front and rear engine and prop) using rotary
turbocompound engines could be a very nice airplane indeed.

Regards,

Gordon.





The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.