Subject: Redrive oil supply & return
From: Rotary Engine
Date: 5/31/2006, 6:01 AM
To: AAme


     Hello Paul-

     I found the oil port you were suggesting for feeding the RD1C on the
top
     of the #1 end housing (aka front housing in the car).  Initially I
     couldn't tell if it was an oil port or a coolant port.  I hand propped
     per your suggestion to get oil pumped through the engine & cooler, and
     when oil came welling up out of the mystery port (a-la Jed Clampet) I
     got my answer.

     I'll be adding a return port to the oil pan (btw -- you should add one
     to the plans, since everyone will need it).  I am assuming it is wiser
     to add it to plugs side of the engine instead of the (hot) exhaust
     side.  Do you think the supply & return lines should be rigid
     tubing, or
     flexible lines?

     Mark Supinski

     The turbo engine front (car) cover has a port for oil return
     from the turbo you can use. Just below the apex oil metering pump.

     I would use Teflon lined double SS braided AN hose. This is your
     life you are fooling with :) Some use rigid aluminum line but they
     are asking for it.

     Paul Lamar ...No rotor no motor.



Paul-

I searched the front cover, and this is the only likely candidate I
could find for the oil return port (pic 1).  Presuming this is the
correct port - what will happen when I remove this cover?  Will oil come
pouring out?  I assume that I should just get an AN fitting welded onto
the cover & reattach.

For completeness sake, the oil supply port is pic 2.

Mark Supinski

Too high for oil to pour out. Strange cover however.
Please unbolt it and take another picture. I do not recognize
the cover. Looks like two piece.

The oil supply point is correct.

-------------------------------------
Cover over the oil metering pump?

You can also drill and tap a hole in the base of the rotor housing on the
plugs side of the engine for the oil return.
Bill Schertz

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.