Mazdatrix is building a three rotor P-port engine
   with RX8 rotor. The slots have been opened
   up for 3 mm Ianetti ceramic apex seals.
   The carb was scavenged from a Porsche engine.
   Should be around 450 HP at 9000 RPM or so
   without too much trouble.

   Paul Lamar ...No rotor no motor.

Paul,
Those inserts look great. Do you know if the small fillet at the outside
edge of the housing is epoxy or did they tig the spigots? Or perhaps I'm
not seeing the picture correctly.
Bill Jepson


BTW Francois do you have plans to cast a 3 rotor wide
intermedaite housing. Mazda is sold out of them. Guru racing
is making three rotor E-shafts but there is no source currently
for the cast iron wide intermediate 3 rotor housing.

Seems to me there is a much bigger market demand in auto racing
for that casting. You may wind up with the only source of 3 rotor
engines in the world :)

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.