Bill
For a P-ported 13B do you have any idea of the flow and pressure the
injected air would need to be at? I am considering it as an addition to the
Inconel spin muffler.
DougFir
----------------
I have no idea, I strongly suspect that the energy costs of pumping the air
in would exceed the energy increase in the extraction process.
There were, before widespread use of catalytic converters, air injection
pumps in an attempt to lower emissions. These operated to inject air to
complete the combustion of the unburned HC. However I have no idea how much
power that they took to operate.
Bill Schertz
KIS Cruiser # 4045
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.