My hangar neighbor was flying back from OSH
and his Lyc engine started spewing oil vapor.
He landed at first opportunity and took
off the cowl. An aluminum tube connecting the
main oil gallery with the oil pressure sensor
had fatigued and cracked. Half the sump oil was gone.
The Adel clamp holding the sensor had broken and parts
of it had fallen away.
Aluminum has bad fatigue characteristics.
It is not a good idea to use it for the engine or
gear box oil supply. Use SS double braided Teflon flex
AN line if you can find it. Single braided is OK in the
smaller sizes if you can't find the double braided stuff.
The rotary oil pressure can be up to 130 psi when cold.
It is also a good idea to use the stock oil level sensor
in the oil pan from an RX7 or RX8. This will give you
an earlier warning of an otherwise catastrophic
oil leak. I showed my neigbor the Mazda oil level sensor
and he is thinking of installing it in his
Lyc oil pan.
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.