> > > Hi,
> > > I got a problem.
> > > I ordered a Renesis engine from Rupert.
> > >
> > > I try know to make a engine stand head before the engine
> arrives,
> > > like the one in the attachment.
> > >
> > > Can anybody tell me the dimensions for this stand head,
> especially
> > > the distance between the bolt holes?
> > > I have no engine available, so I can't measure it myself.
> > >
> > > Thanks in advance.
> > >
> > > Kind regards
> > > Thomas
> > >
> > > That is my problem too. I don't have an RX8 engine lying
> > > around. I might be able to measure my RX8 engine in my RX8
> > > car but I am home and the RX8 is in the hanger. I might
> > > be able to help you after six o clock my time.
> > >
> > > --
> > > Paul Lamar ...No rotor no motor.
> >
> >
> > If your stand has the adjustable "Z" type mounting brackets, you
> may be
> > able to bolt it right to the engine. I bolted these brackets to the
> > 10mm bolt holes on the side of my Renesis without an intermediate
> plate.>
> > I can get these measurements if no one else has them handy.
> >
> > Scott Gettings
>
> I added a pic of my engine stand.
> I'm not sure if the factory stand head will work on a renesis.
> Did you mean that with Z-type?
>
> Thomas Rebhan
This is about what mine looks like. The "Z", movable brackets on my
mount are big enough for a 10mm bolt. I got some long bolts and
adjusted the Zs over the 10mm block holes and was able to get 3 bolts
into the block without any problem. This will depend a little on the
exact length and base plate of your unit.
I can get the exact measurements this weekend if still needed.
Scott Gettings
If we are talking about the rear housing bolt holes I have those
and here they are.
Paul
Cool, thank you Scott.
I'm a Optimist. I'll try this stand head.
Thanks for you efforts paul.
I think the stand head is mounted on the side of the front housing.
Thomas Rebhan
OK that is a different matter.
One thing I don't understand and I am curious about.
Why do you need the info before you get the engine?
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.
