Is number four hose big enough for the Renesis fuel rail? Did Ian use
the plastic fuel line that came with the Renesis?
I cut 1 1/4 inch off my oil filter adapter and I think it was 1/4 inch
too much. I may have to grind a little off the steel end cover. H. Karibian
 We use -6 or bigger for fuel.
-- 
Paul Lamar ...No rotor no motor.

You can drill out the ends of the Renesis fuel rail and weld in a short
piece of 3/8" 4130 or SS tubing.  Then drill out the female end of a
steel, 1/8" FPT x -6 male adapter and weld it onto the rail/tubing and
you'll have -6 connectors in place without any restrictions to fuel flow.

Scott Gettings



The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.