> There is an article in this months Sport Compact
> Car about how some dummie spent big bucks shoehorning a
> 300 ci LS1 V8 into a third gen RX7. No expense spared.
> Surprise! The 159 ci rotary was .12 G quicker on the skid
> pad (that's a lot) and 3.85 seconds quicker (that's a lot)
> around a real tight road course. (Streets of Willow) The 80
> to zero stopping distance was 35 feet shorter from 80 MPH. Duh!
>
> What a way to ruin a great car.
>
> Paul Lamar ...No rotor no motor.
But here is a chance for some one to track this goombah down and
possibly
pick up a good rotary either cheap or free.
John
Yep.
BTW the magazine got the weight of the 3rd gen turbo 13B engine
at 425 pounds. Pure unadulterated BS. Bare weight is under 200 pounds.
Add 50 pounds at the outside for the dual turbo's and another 30
pounds for the flywheel and clutch.
--
Paul Lamar ...No rotor no motor.
Well.....
how about the same concept in reverse- take out the V-8 or V-6 and
install a 16B or 20B into one of the new Ford Mustangs? As you know,
there is a precedent- the mid-60's Mustang that Ford tried out a
Curtis-Wright Wankel in. Ford's stock is going down, how hard would it
be for them to try out something like that? What do they have to lose by
at least trying the concept out?
Brian Trubee
Cars are designed around the weight and size of the engine.
A 13B, due to it lack of torque would be a diaster in a
heavy Mustang. A three rotor or four rotor would be OK.
Paul Lamar
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.