There is not a lot of clearance inside the Schertz beam
for a 10 mm socket so buy some metric internal wrenching
bolts from McMaster Carr. The correct size is 6 mm 1 mm pitch.
http://www.mcmaster.com/
--
Paul Lamar ...No rotor no motor.
The bolts and the ball end allen wrench worked o.k.
For the record the right bolts are 6mm x 16mm x 1.0 pitch.
(plus flat washer) Use 5mm ball end allen wrench.
Jerry Hey
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.
--
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.
