> > > > Hi,
> > > > I got a problem.
> > > > I ordered a Renesis engine from Rupert.
> > > > > > > > I try know to make a engine stand head before the engine > > arrives, > > > > like the one in the attachment.
> > > > > > > > Can anybody tell me the dimensions for this stand head, > > especially > > > > the distance between the bolt holes?
> > > > I have no engine available, so I can't measure it myself.
> > > > > > > > Thanks in advance.
> > > > > > > > Kind regards
> > > > Thomas
> > > > > > > > That is my problem too. I don't have an RX8 engine lying
> > > > around. I might be able to measure my RX8 engine in my RX8
> > > > car but I am home and the RX8 is in the hanger. I might
> > > > be able to help you after six o clock my time.
> > > > > > > > -- > > > > Paul Lamar ...No rotor no motor.
> > > > > > > > > If your stand has the adjustable "Z" type mounting brackets, you > > may be
> > > able to bolt it right to the engine.  I bolted these brackets to the
> > > 10mm bolt holes on the side of my Renesis without an intermediate > > plate.> > > > I can get these measurements if no one else has them handy.
> > > > > > Scott Gettings
> > > > I added a pic of my engine stand.
> > I'm not sure if the factory stand head will work on a renesis.
> > Did you mean that with Z-type?
> > > > Thomas Rebhan
> > This is about what mine looks like.  The "Z", movable brackets on my
> mount are big enough for a 10mm bolt.  I got some long bolts and
> adjusted the Zs over the 10mm block holes and was able to get 3 bolts
> into the block without any problem.  This will depend a little on the
> exact length and base plate of your unit.
> > I can get the exact measurements this weekend if still needed.
> > Scott Gettings
> > If we are talking about the rear housing bolt holes I have those
> and here they are.
> > Paul



Cool, thank you Scott.
I'm a Optimist. I'll try this stand head.

Thanks for you efforts paul.
I think the stand head is mounted on the side of the front housing.

Thomas Rebhan

OK that is a different matter.
One thing I don't understand and I am curious about.
Why do you need the info before you get the engine?

Paul Lamar ...No rotor no motor.

Well, things are a little bit complicated.
I have to store the engine in my fathers garage because I have no room at my present domicile.
I want to manage some things before the engine arrived, so I can conclude everything on one weekend.

Kind Regards
Thomas



The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.