Subject: Renesis Question 4 port V 6 port.
From: Rotary Engine
Date: 8/8/2006, 4:23 PM
To: AA-me


  Hi Paul,
probably not a worry, but as I remember, discussion on here said
the side gears are new tech on the 6 port, area of contact etc,
The 4 port side gears are the same as the 13B.
" I could be wrong"
GL, Dave McC

----------------------------------------------------------
Sounds plausible to me. There is one heck of a difference
in the red line.

I wonder if Mazdatrix knows about this?

Paul Lamar ...No rotor no motor.

Dave,
If your talking about the stationary gears (tip relief) - this is an
improvement with the RX8 and is really only an improvement that was done on
aftermarket performance people and pick-up by Mazda.
George (down under)

George,
I am not sure what you are saying here. My statement was:
IIRC; " the 6 port Renesis side gears have different tooth design than
4 port Renesis side gears".
So, if you buy a 4 port Renesis you get the old 13b side gears.
Guru redesigned the side gears in their high performance engines a few
years back  .
FWIW, Dave McC


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.