Subject: LS1 verses 3rd gen turbo rotoary in a 3rd gen RX7
From: Rotary Engine
Date: 8/11/2006, 1:28 PM
To: AA-me


>   I believe the rotary is the better engine, especially when we work out
> the aluminum end plates. I must correct some misconceptions though. The
> new LS-1 engine is a very nicely built engine as V8 piston engines go.
> The bottom end is beefed up considerably from the cast iron small block.
> The engine uses a full skirted lower end with 4-bolt cross bolted mains
> stock. Looks like a miniature version of the Chrysler Hemi. All very
> nice of course but we aren't really interested in Chevys here anyway.
> Besides there is still the limited area of the standard rods...etc. I'm
> amazed that the RX7 conversion idiot thought it would be better with the
> chevy! If the dope had put half as much into uprating the rotary as he
> spent on the conversion he probably could have doubled the V8s numbers
> and had money left over!


  A kid at the engineering school here at the University of Missouri
put a V8 in his RX8. He turboed the 13b and blew it up. The machinist
that told me about it, says "it is real dependable now, it never has a
problem". Like it wasn't before, at least before he boosted it.

Blake


Hey let them do it, more engines available for us. I bought one for
$500 only had 70,000 miles.

Vince R.

Brand new.
-- 
Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.