This is the rectangular home made version.
No plasma or laser cutter required.
Nothing you can not do with a modern saber saw, sawsall
or hole cutter. You will need some tig welding for the overall
p-port manifold and slide throttle.
I am sure Ed Klepeis can make the whole thing for you
if you ask.

The Teflon is 3/8" thick and front and rear plates
are 3/16" so the 2 inch runner tubes can be directly tig
welded to them. There will be more drawings and 3D's shortly


Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.