> These guys in Canada are using a slide throttle as well on a fully built
 > 20B. If you look closely in the video it doesn't look like the slide
plate
 > is Teflon.  Looks like SS metal or (aluminum?).
 > See video on right side of page.
 > http://mpsys.ca/MPSv1.htm
 >
 > Paul Chang
 >
 > My browser won't work with that .htm Paul.
 > Can you capture a few jpgs from the video?
 > Maybe they are using linear ball or roller bearings.
 > --
 > Paul Lamar ...No rotor no motor.

At the risk of sticking my nose in where it doesn't belong, I went to that
web site and found a bunch of stills. I don't think they show the internals
of the throttle, but they are interesting. I did not include all of the pix
there -- just the ones that might shed some light on the intake system.

Doc

OOps! forgot to attach the pix. Here they are.

All I see are flanges. I see no pictures of the slide throtle.

If it is a slide throttle tt better be Teflon or antifriction
bearings with that turbo charger you could easily
lock up a slide throttle.

What is the URL Doc?


Paul Lamar

http://mpsys.ca/Images/RX7/WebAlbums/20B%20Assembly/index.htm

Doc





The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.