Subject: Better gas mileage on the RX8 engine
From: Rotary Engine
Date: 8/17/2006, 10:22 AM
To: AA-me

   Car AND Driver is my favorite car magazine. They are the
   no spin guys. The Editor in Chief, Csaba Csere, is a former student
   of mine. I only had him for a week 30 years ago but I like to think
   I had a disproportionate influence on him. I could be way wrong .
   We used to see more of each other but lately, since I got out of the
   car testing equipment business, I don't see him much. It did run in
   to him at the Tokyo Motor Show last year.

   Recently C AND D did an article on diesel powered cars.
   Mercedes think they have found a way to make diesel engines
   meet the U.S. EPA draconian smog rules in regard to NOX.
   One of the emissions problems that a lean burn engine
   has, such as a diesel, is NOX. Mercedes has come up with a
   possible solution.

   The rotary, surprisingly, is also a lean burning engine and it
   obtains its best BSFC at low power by running very lean. Something
   on the order of twenty pounds of air to one pound of fuel
   and at an EGT reading of 200 degrees F lean of peak. This is much
   like a diesel.

   IMHO and the opinion of Tracy Crook, who has a hundreds of hours
   running the rotary lean, thinks this has to do with the rotating
   combustion chamber. Tracy thinks, and I agree with him, the
   centrifugal force on the fuel molecules, being heavier than
   air, tend to congregate out near the spark plugs. You might
   call this a form of stratified charge. Therefore the rotary
   engine runs smoothly at lean mixtures the gas piston engine
   can only dream about. If you have ever owned a gasoline engine
   powered boat you know that gasoline vapors congregate in
   the bottom of the boat called the bilge. Therefor they are
   heavier than air. If you don't ventilate your bilge properly
   your boat can blow up.

   However the RX8 engine computer keeps the mixture at 14.7 pounds
   of air to 1 pound of fuel AKA stoichiometric to minimize NOX
   under all cruise conditions. Too rich for best BSFC. This
   can be proved by connecting your note book computer to the
   OBD II connector under the RX8 dash and recording the mixture
   ratio in real time. This software and connector will work.
   I use it my self. http://www.autoenginuity.com/

   The RX8 would get a lot better MPG during freeway cruise and around
   town if the mixture were leaned out and other means of eliminating
   the NOX were employed. The Mercedes method could be one of them.

   Paul Lamar ...No rotor no motor.

   BTW I forgot to mention the properly leaned rotary engine
   powered aircraft obtain about 30 MPG at 150 MPH. Try that in
   your RX8.

   --
   Paul Lamar ...No rotor no motor.

   Paul, ET AL

   I see that Auto Enginuity is selling several scanners on EBay for
   $199.99.  Try item 300018083590, or do a search for autoenginuity.

   I assume this is the basic unit, not the one that lists for ~ $800.

   Joel

The $200 price sounds like the cable/connector and software for your
lap top computer. That is about what I paid. The $800 price sounds
like a stand alone scanner as there are many others on the market.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.