paul

The slide drawing that you sent me is a little strange. I thought
the slide was just one piece Teflon. I see some sort of  oblong
grove around the 1in port holes is there some sort of O-ring or
something?

Tony

It is one piece.
That is for the optional Teflon encapsulated silicone O-rings.
Some builders are concerned with leakage around the slide
and these O rings address that issue. IMHO they are not necessary.
I just drew them in anyway.

Here is the source for the O-rings. http://www.creavey.com/

We use the same type O-rings to seal the water jacket and
the oil scrapers on the sides of the rotors.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.