Subject: boring holes in rotor housings
From: Rotary Engine
Date: 8/21/2006, 4:36 PM
To: AA-me

Here are some more pics.
Notice how the short tube seats in the counter bore
just short of the steel liner.
You can use a high quality 1.5 inch hole cutter
instead of this shell mill to rough it out before
final boring.
-- 
Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.