Subject: hypotrochoid, trochoid, epitrochoids ?
From: Rotary Engine
Date: 8/26/2006, 6:15 PM
To: AA-me

Paul,

Actually to be precise the housing shape is hypotrochoid, because you have
one circle inside another -- the e-shaft gear inside the rotor gear. The
shape that is traced by a point on the outside of the larger circle (rotor)
is hypotrochoid. Remember the Spirograph toy that traced neat patterns?
That's a hypotrochoid.

http://xahlee.org/SpecialPlaneCurves_dir/Hypotrochoid_dir/hypotrochoid.html


Thanks for the article. I went back to take a look at some of the animations
of the rotary in motion. Yes, I see now that there is no linear acceleration
of the rotor mass. It just seems that way until you look very closely and
visualize the CG of the rotor, which actually goes in a perfect circle
around the e-shaft.

What threw me was the irregular shape of the rotor. I assumed an uneven mass
distribution, and along with the hypotrocoid trace of its outside edge would
somehow make its CG go in an elliptic arc rather than a circle. But no, you
are right the CG goes in a perfect circle so there can be no linear
momentum.

A picture really is worth a thousand words -- and a good animation must be
worth a million. Studying these graphics really is the best way to get a
good handle on how this ingenious engine works.

And getting back to the bearing loads on the supercharged engine. You are of
course correct to point out that the boosted engine will have higher loads
than those shown in the graph. I agree completely. This approach just isn't
going to work, for the reason of the bearing loads if nothing else.


Regards,

Gordon.

Its a trochoid check out this site.
http://mathworld.wolfram.com/Trochoid.html

See if you can find a copy of this book. I would scan in the
appropiatie pages but it is at the hangar and I am at home.

"The Wankel
RC Engine Design and Performance" by R.F.Ansdale Published by A.S.
Barnes & Company Lib of Cong 69-18692

This animation is a hypotrochoid

Paul Lamar ...No rotor no motor.


Paul,

I know this is splitting hairs, but my understanding of a trochoid is that
it is the trace of a fixed point on the rim of a circle rolling on a
STRAIGHT line. That's also what the Wolfram definition says in that link you
gave.

http://en.wikipedia.org/wiki/Trochoid


A hypotrochoid is roulette traced by a point on a circle rolling within
another circle. See second attached gif.

http://en.wikipedia.org/wiki/Hypotrochoid


This is exactly what the rotary is. The rotor gear is the bigger circle
within which the smaller e-shaft gear is turning. The trace of the housing
is defined by a point along the rim of the rotor.

I think possibly the term trochoid came into use to describe the rotary in
the generic sense of the term, since trochoid is broadly used to mean the
whole family of trochoids wchich includes hypotrochoids and epitrochoids.

Thanks for the book reference. I will be adding that to my tech library.
Btw, what does the RC mean in the title?


Regards,

Gordon.


As usual Ansdale is the definitive authority.

RC means Rotary Combustion engine.
-- 
Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.