Subject: Now the proud owner of a spare RX8 PCM.
From: Rotary Engine
Date: 8/27/2006, 9:16 PM
To: AA-me


    I'll be telling you more about this in the coming
    years as time permits. I intend to reverse engineer
    this product and wind up with a commented assemble language
    source listing of the embedded program.

    Paul Lamar ...No rotor no motor.


Hi Paul,

    Go for it!  It will keep you out of mischief.

Jim [Mederer]

You are not implying I create havoc in the rotary engine world
are you?  :)

I think you need to download the hardware manual for the SH-2E.
http://america.renesas.com/fmwk.jsp?fp=/search&site=i&cnt=SearchResults.jsp&qt=SH-2E&col=iactenam

I did and it is wonderful :)

Paul Lamar ...No rotor no motor.



Paul an eazier way to do a pcm is to use an manufactured board which has the speed and capablity you require. I have been looking at the servopod from www.newmicros.com. Forth is a very easy language to learn almost like Basic. The only problem is the laptop program to modify the various tables for fuel and ignition.Perhaps a Basic program could be written to access and modify the tables like is done with commercial engine management units. I think that writing a program form scratch would be easier than reverse enginering the code in the rx-8 pcm.

s male

Well true but there is no challenge in that. Jim Mederer
of Racing Beat wants to offer a flash upgrade for the stock RX8 PCM
that will improve the MPG. The EPA will not let us change
anything under the hood. Nothing they can see anyway.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.