Subject: P port fixture / 2" hole depth?
From: Rotary Engine
Date: 8/28/2006, 7:50 PM
To: AA-me



Paul,  in boring the p ports did you stop just before touching the
steel inner liner or did you go  partially into it?      This is the
fixture I came up with. It is pretty much a copy of the way you did
yours, I believe.  It is rock solid.   The clamp is 3/4" plate on the
back and a 1" bar on the front  Held together with 5/8" bolts.  I
could add some big C clamps but I don't think they will be
necessary.   Jerry

It is only about 2 mm thick so I stopped before I got
into it.

-- 
Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.