>
>>
>> Paul,
>> As of today I have bored p ports both ways, straight thru one size
>> and/or  with a shoulder.  Of the two, the shoulder version finishes
>> off perfectly inside the housing as you have said  and for that
>> reason I think it is better.  I am happy to report my  little fixture
>> was adequate.  No vibration at all even when I hit it with big
>> tooling.  This time I bored a 1.5" dia hole with a six flute HSS end
>> mill  and then finished with the boring head.  The job went slowly
>> due to the amount to be removed.  If I end up doing more of these, I
>> will buy a 1.75" mill.   Other than that, no problem.    If anybody
>> wants to do their own, I will be glad to offer verbal assistance.  I
>> do not have any 2" aluminum tube so I stuffed a steel exhaust bend in
>> the hole to see how it looked.     Not bad.      Jerry
>>
>> Sorry about the clutter.  That is how my desk always looks.
>>
>>
>> Good work Jerry. How much would you charge?
>> I think it would go faster if you drilled it one inch dia. first
>> to give clearance for the end mill center.
>>
>> Paul Lamar ...No rotor no motor.
>
>
> What do  you think about me making and installing the inserts too?
> The  logical package is one that is ready for the slide throttle. Not
> to mention that I got a new tool post and  holders today that I am
> itching to try out.   Could  you send me a drawing of the inserts.
> Thanks    Jerry
>
> Fine with me. The drawings are on the web site.
> http://www.rotaryeng.net/intake.html
>
> DXF maybe. What does you drawing program import?
>
>
> Paul Lamar ...No rotor no motor.


Paul, I looked for the drawings but could not locate.  I think I
opened every file under "Intake Systems."  Jerry

What is on the web site is a jpg of the drawings.

I sent these out on the 22nd but here they are again in DXF zipped
form. Perhaps your ISP does not like zip.

Paul Lamar ...No rotor no motor.

OK Jerry here are the other two parts.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.