Thanks. I would think the ribs would increase the young modulus number and
make the housing stiffer. Same reason an H beam is stiffer than a flat bar.
Doug,
One of the best mechanical engineers I ever worked with stated a
general rule, "Removing material always weakens a structural shape."
There are some specific exceptions, but not many. I agree with Paul that
the housing is weakened by the slots. What you are thinking about may be
a bar and I beam of the same weight. in that case the I beam would
generally be stiffer, but the profile of the I beam would be
considerably taller. What is being attempted on the pictured housing is
obviously increased coolant contact area. It might be argued that slots
aligned axially with the e-shaft would increase the area without
impeding the flow as much. That profile would reduce the cross-sectional
area and weaken the housings more than the radial slot though.
Bill Jepson
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.