Jerry,

I just talked to Ken at Vans. Stonewall. Call back next Monday. I don't
have access to those drawings. The rotary has too many problems. Just
get the mount from us and match drill it to the firewall. etc., etc.,
etc. The one thing that he did say was that he thought the exact
location wasn't too critical. 'If you get it within 1/4" it will
probably be all right.' This from an "engineer!"

Rats. <other expletives deleted>

I notice that Conversion Concepts offsets the engine 1 degree. To the
right for the RWS RD-1C 2.85 redrive. But that doesn't help much.

Where do we go from here?

Doc

No problem Doc we got it. If you have the cowl measure the lenght
of it to the prop flange hole from the back while
it is sitting on the floor pointing up. Most are 39 inches.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.