>
>
>Tell me more about the RX8 engine powered Cobra that crashed in
>Queensland. Why did it crash? Does Baz know about this?
On third test flight by an experienced test pilot.
I will get some more details.
Ian,
G'day guys,
Yeah, I know about that Cobra. I didn't know the Jabiru was in the air
yet,
I thought the engine was still being fitted. The Cobra in question (
unless
there has been one I didn't know about) was crashed on landing when the
wing
went under a boundary fence line. The pilot of that plane had a history
in
the Air Force but many years ago. Thats the one that burnt most of the
fuselage. It was totally pilot error and not related to my pitch
problems.
Incidently I am now waiting for the antiservo tabs.
Keep all the good info coming, I am learning heaps!
Baz
Baz
Do you have any pictures or a sketch of the exhaust system on the Cobra? I
need to confirm that a simple system won't wake you up from Western
Australia.
What ignitor coil packs are you using?
Ian Beadle.
G'day Ian,
Sorry I don't have a pic of the exhaust system. It is simply a 3 into 1
header turning down to a flow through muffler supported by typical rubber
support. The muffler itself has air flowing through the centre where it
mixes with diffused exhaust gas from the engine. The muffler is outside and
below the level of the bottom cowl. While it is loud, it is not so loud as
to cause concern. I am using Bosch sport coils (4) and M&W ignitors (2), the
ECU is Wolf 3.
Baz
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.